TEVA x YOU

With the Teva x HonestlyWTF DIY kits, you're the collaboration partner. Follow our design or create your own. It's totally up to you!

The DIY Kit

Your blank canvas is waiting

  • Each DIY Kit Includes
  • One Pair of Original Universal Sandals or Flatform Universal Sandals

  • Swarovski Crystals

  • Application Tools

  • Embroidery Floss

  • One information booklet instructions and tips from Erica Chan, Founder of Honestly WTF

Expertly Designed

Created by the DIY Pros at HonestlyWTF

My favorite thing about DIY is that there is no right or wrong approach. Whatever inspires you, whatever you're feeling...so long as you express that and put in the effort, you'll feel proud of what you've made.

ERICA CHAN COFFMAN of HonestlyWTF
Follow our Design

With step-by-step instructions

Or Create Your Own
Quick Tips

Heat Transfer

The Process

Embroidery (needle point)

Tools you'll need (not included)

HonestlyWTF Design Step-by-Step

1

Cut the transfer film to get close to the edge of the design. Peel the backing off the Swarovski crystal transfer and place on the strap of the sandal.

2

With the clear plastic film still adhered to the top of the crystals, sandwich the transfer and strap between the heated flat iron. Apply even, moderate pressure without moving the iron.

3

Remove iron after 10-15 seconds and slowly remove the plastic film. If any crystals are still stuck to the film, replace the film and repeat the application.

4

If any of the crystals are not glued down after the film is completely removed, you can go back and individually place each crystal into the design and reheat with the iron.

5

To apply the single crystals, you'll need E6000 glue. Squeeze a quarter sized amount of the adhesive on a scrap piece of paper. Use a toothpick to scoop up a dollop of glue and place it on the backside of the crystal.

6

Place the crystal on the strap and hold it in place for about 2-3 minutes. Crystals applied with E6000 should be let to dry overnight. If you want to move the placement of the crystal after it has been glued, you must wait for it to dry completely before removing the crystal.